Artisan Technology Group Quest 210 Dokumentacja Pobierz pdf (Strona 11)

Revision

06/23/98

Argonaut

Technologies

5.3

Gas Requirements

The ASW Controller Unit can be configured to operate on either a single inert gas source or a

combination of inert gas and compressed air. On the rear panel of the ASW Controller Unit are two

gas inlet ports. One port requires a regulated

40-60

PSI source of high-purity (>99.98%) inert gas.

This gas is used for delivering solvents and creating the inert reaction environment in the Reactor

Unit. The second port requires

regulated

55-60

PSI source of clean, dry compressed air. This gas is

used to operate the agitation system in the reactor and control valves in the ASWM. When

compressed air is used it is recommended that a dryer be installed on the compressed air line to

prevent water from entering the system plumbing. Each source should be able to connect to

inch

OD tubing. Included, as part of the Automated Solvent Wash Option, is a Gas Supply Assembly to

allow connection of the ASW Controller Unit to the gas

source(s).

Note: Powering the agitation and control valves with compressed air will significantly reduce

- -

the amount of inert gas consumed bv the Quest.

5.4

Waste Requirements

A Quest

210

with the Automated Solvent Wash Option uses the same Glass Waste Tank for waste

collection as the standard Quest. Depending on the automated wash program it may be necessary to

attach a line from the Glass Waste Tank valve to a larger waste container. Refer to State and Local

regulations on the handling and disposal of hazardous waste.

5.5

Ventilation Requirements

Depending on the chemistry, a Quest

Organic Synthesizer with the Automated Solvent Wash

Option can generate volatile waste. The ASWM must be placed directly in a fume hood before use.

This allows for the proper venting of any hazardous vapors providing optimal laboratory safety. If a

Quest

with the Automated Solvent Wash Option is installed outside a fume hood a method to

evacuate any hazardous vapors created during operation is required (i.e. snorkels, adjustable hood).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Komentarze do niniejszej Instrukcji

Brak uwag

Artisan Technology Group Quest 210 Dokumentacja Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Syntezator Artisan Technology Group Quest 210